Oki C821 Скачать руководство пользователя страница 90

Страница: 90 / 104

Installing upgrades > 90

DJUSTING

PRINTER

DRIVERS

Once your new upgrade has been installed, you may need to update the printer driver so

that the additional features are available to your applications.
Remember that if your printer is shared between users on different computers, the driver

must be adjusted on each user’s machine.
The illustrations shown here are for Windows XP. Other Windows versions may appear

slightly different, but the principles are the same.
If you have installed a memory upgrade it is not necessary to change the printer driver,

and you can ignore this section.
If you have installed a duplex unit, hard disk or paper tray(s), proceed as follows:

INDOWS

Access the driver’s Properties window.
(a)

Open the Printers window (called “Printers and Faxes” in Windows XP) via the

Start Menu or from the Windows Control Panel.

(b)

Right-click the icon for this machine, and choose Properties from the pop-up

menu.

Select the

Device Options

tab.

In the Windows XP PostScript driver the tab may be called

Device Settings

Set the options for any devices you have just installed.

Click

to close the window and save your changes.

OS X

If you have added additional hardware to your printer, these must be enabled in the printer

driver. Additional hardware may include extra paper trays, a printer hard disk or a duplex

unit.

Snow Leopard (Mac OS X 10.6) and Leopard (Mac OS X 10.5)

Open the Mac OS X

Print & Fax Preferences

Ensure your machine is selected.

Select

Options & Supplies

Select

Driver

Select all hardware options appropriate to your machine and click

Содержание C821









































































































Результаты поиска

Содержание C821

Отзывы:

Oki C821, Руководство пользователя, Страница: 90 / 104

Результаты поиска

Содержание C821

Отзывы: