Oki B8300, Руководство пользователя

Страница: 73 / 95

Finisher — 72
FINISHER
The finisher can deliver collated sets either stapled or unstapled. Unstapled sets can be offset stacked
from the previous set for easy separation of the sets.
Part names
●
Do not put pressure on the finisher (particularly each tray).
●
Do not place anything on the top cover. Doing so will interfere with the machine’s paper handling
during duplex printing.
●
The tray moves up and down during operation. Be careful not to impede its movement.
●
The finisher requires the installation of other peripheral devices in order to be functional and cannot
be installed together with some other devices.
Specifications
B8300-FNR staple cartridges must be used for this finisher.
The cartridge package contains three cartridges containing
approx. 3000 staples each.
Name Finisher
Number of trays Two
Paper output Print face down
Tray type Top tray: normal tray, Lower tray: offset tray
Tray capacity
Top tray: 500 sheets (A4 or 8½"
x
11" size, 80 g/m
2
or 20 lb
Lower tray: 750 sheets (A4 or 8½"
x
11", 80 g/m
2
or 20 lb)
Paper sizes Top tray: same as the specifications of paper for feeding in the main unit
Lower tray: Max. A4 or 8½" x 11", Min. B5
Paper weight Top tray: same as the specifications of paper for feeding in the main unit
Lower tray: 60 to 105 g/m
2
or 15 to 34 lb
Paper types Top tray: same as the specifications of paper for feeding in the main unit
Lower tray: plain paper only
Tray full detection Provided in both the top tray and the lower tray
Offset function Provided for the lower tray only. The offset amount is approx. 25 mm (1 inch)
Paper sizes for stapling
8½" x 11", A4, and B5 30 sheets* (A4, 8½" x 11" or smaller, 80 g/m
2
or 20 lb)
Stapling capacity
30 sheets* (A4 or 8½"
x
11" or smaller, 80 g/m
2
or 20 lb)
Up two sheets of cover stock (128 g/m
2
or 34 lb) can be included
Staples Single staple can be placed in the top left or lower left corners
or two staples can be centred on the left side
Power supply Requires the installation of an optional power supply unit
Dimensions
465 mm (W) x 530 mm (D) x 508 mm(H); (18
1
/
8
" (W) x 20
7
/
8
" (D) x 20" (H))
Weight Approx. 21 kg (46.3 lb)
Specifications are subject to change without notice
Top tray
Extend tray to print
on to large paper
Latch
Release the latch to
open the finisher
for misfeed removal.
Top cover
Open for misfeed removal.
.
Staple box
Pull the box out to replace
the staple cartridge or
to remove jammed staples.
Offset tray
Stapled sets or sets
to be offset will
be delivered here.