- 18 -
About the Options
1
Setup
●
●
About the Options
Available Options
The following options are available for your
printer:
●
Additional tray unit (tray 2/3/4)
●
Printer stand
●
Additional RAM (512 MB)
●
160 GB hard disk
●
Large-capacity tray unit (LCF) (For details
on how to attach it, refer to the instruction
manual furnished with the LCF.)
●
Printer stand anti-tip foot (1 set)
Attaching a Printer Stand
To attach a set of anti-tip feet
Screws (22)
Anti-tip Foot
Cover (2)
Anti-tip Foot
Rear (2)
Anti-tip Foot
Cover (2)
Anti-tip Foot
(2)
Anti-tip Foot
Side (2)
1
Attach the anti-tip feet (both sides and
front) with four screws.
Note
●
Attachment directions are different for the left side
and the right side.
2
Put the bottoms of the anti-tip feet (both
sides) on the floor, align the sides to the
cabinet and tighten them with the two
screws each.
Screw Hole
Содержание B721
Страница 156: ...45489202EE Rev5...