Oki B6250dn Скачать руководство пользователя

Страница: 87 / 136

B6250 User’s Guide> 87

Disk Menu

The

Disk Menu

provides access to the disk settings. Use the

following procedure to enter the disk menu:

Press the

MENU

button on the control panel.

Press the < > button until the text “

Disk Menu

” is shown on

the first line of the display.

Press the < > button to enter the disk menu.

Press the

> or < >

buttons to move through the

submenus.

Press the < > button to enter the submenu.

Use the procedures in the following table to perform the Disk Menu
options.

Submenus

Procedure for Changing Setting

Data Security
When set to ON, as data is

deleted, the location where the

data was stored, is overwritten by

random data. When set to OFF,

the data is deleted.

Press <

> or < > to toggle between On or

OFF.
Press <SELECT> to save the selection.

Print
This selection will read the

selected file from Disk and print it

as if it were being received from

one of the input ports.

Press <

> or < > to scroll through the files.

Press <SELECT> to print the file.

Delete
This selection will delete the

selected disk file or directory from

the hard disk. To delete an entire

directory, you must first delete all

the files within that directory.

Press <

> or < > to scroll through the files.

Press <SELECT> to delete the file.

Содержание B6250dn









































































































































Результаты поиска

Содержание B6250dn

Отзывы:

Похожие инструкции для B6250dn

Бренды по названию

Популярные бренды

Oki B6250dn, Руководство пользователя

Результаты поиска

Содержание B6250dn

Отзывы:

Похожие инструкции для B6250dn

Бренды по названию

Популярные бренды