6.6 Cleaning the Printer
125
Initializing Print Meter Data
1.
Press the <MENU> button to display the Menu screen.
2.
Press the <
> or <
> button until [Admin Menu] is displayed, then press the <
>
button.
3.
Press the <
> or <
> button until [Init/Del Data] is displayed, then press the <
>
button.
4.
Press the <
> or <
> button until [Print Meter] is displayed, then press the <
>
button.
5.
Press the <FEED/SELECT> button.
Initialization will start.
6.
Press the <MENU> button.
6.6
Cleaning the Printer
This section describes how to clean the printer in order to maintain it in good condition and
print clean printouts all the time.
CAUTION
• Be sure to switch off and unplug the machine before accessing the interior of the
machine for cleaning, maintenance, or fault clearance. Access to a live machine’s
interior can cause electric shock.
Cleaning the Exterior
Clean the exterior of the printer about once a month. Wipe the parts with a wet but well-
wrung soft cloth. Then wipe with another dry soft cloth. For stubborn stains, moisten a soft
cloth with a small amount of neutral detergent, and gently wipe the stain off.
Important
• Do not spray the detergent directly on the printer. The liquid detergent may enter the printer through a
gap and cause problems. Never use cleaning agents other than water or neutral detergent.
Содержание B6200dn
