Oki B4300, Руководство пользователя

Страница: 47 / 120

Configuration 45
Using SNMP
The printer and network card can be managed via a standard SNMP
management station. The network card supports SNMPv1, MIB-II and
OKI Data Private MIB. In order for the OkiLAN to be managed correctly
from an SNMP management station, the OKI Data Private MIB needs to
be added to that management station. Please refer to the SNMP manager
documentation for information on how to do this.
The OKI Data Private MIB file can be found in the MIB folder on the
Network Software CD- ROM. Please refer to the readme file in the MIB
folder for further information.
The printer’s trap address can be set in five places using TCP/IP and in
one place with IPX.
Printer trap settings can be made with TELNET and a Web browser.
Using Setup Assistant
Setup Assistant is a large volume tool that can do the following:
> setup ID addresses on multiple print servers all at once.
> update firmware on multiple print servers all at once.
> update the template file and set details in multiple print servers all
at once.
Install Setup Assistant from the CD-ROM provided with your printer.
1. Insert the CD-ROM provided with your printer into the CD-ROM
drive. If the Menu Installer does not start automatically, click
Start
→
Run
→
Browse. Browse to your CD-ROM and click
Install
→Ο
pen
→
OK.
2. Select [Network Software].
3. Select [Installation/Config].
4. Select [Setup Assistant].
5. Follow the on-screen instructions.