Oki B412dn Скачать руководство пользователя страница 460 | Manualshive

Страница: 460 / 637

Oki B412dn Скачать руководство пользователя страница 460

Selecting a Wireless Access Point from the Operator Panel to Connect

If a wireless access point does not support WPS, you can specify a wireless LAN access point you want to use from the wireless LAN

access points that the printer detects to establish a connection. You must enter an encryption key to establish a connection.
Set by following the procedure below.

1.

Check the SSID and encryption key by referring to the instruction manual that is included in a wireless
access point or other document, and write the information down.

Memo

An SSID is also called a network name, ESSID, or ESS-ID.
An encryption key is also called a network key, security key, password, or Pre-shared Key.

2.

Check that the wireless LAN access point starts and is operating properly.

3.

Turn the printer on.

4.

Press or to display [WIRELESS SETTING], and then press (OK).

5.

Enter the administrator password, and then press (OK).

The factory default password is "aaaaaa".

6.

Press or to select [WIRELESS SELECTION], and then press (OK).

The printer starts searching for wireless LAN access points. Wait for a while.
A list of SSIDs of valid wireless LAN access points is displayed.

7.

Press or to select a wireless LAN access point, and then press (OK).

Note

If only [MANUAL SETUP] is displayed, or the SSID of the wireless access point you want to use is not included in the list, set by

following the procedure in "

Setting from the Operator Panel Manually to Connect

The encryption key entry screen that is suitable for the encryption method of the selected wireless LAN access point is displayed.

8.

Enter the encryption key.

Memo

The encryption key varies depending on the wireless LAN access point or security.

If the [ENTER WPA KEY] message is displayed

Item

Description

Security

WPA2-PSK

Encryption key

Enter the Pre-shared Key.

If the [PLEASE SET IN WEB] message is displayed

Item

Description

Security

WPA2-EAP

Set from the Web page of the printer.

Using the Web page of the Printer

If neither of the above two cases is applied

Item

Description

Security

Disable

Encryption key

No entry is required.

The SSID of the wireless LAN access point that you selected in step 7 is displayed on a confirmation screen, and one of the

encryption methods above is also displayed as Security.

459

«
...
458
459
460
461
462
...
»

Содержание B412dn






























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов