Top pane x1
Shelf x2
（
400H
は
x1
）
Side frame x2
Baseboard
x2
Z bracket x4
Self-threading
pan head screw
(M5x10L) x16 pieces
Beam under
the top panel x1
Hexagonal socket
head cap bolt with
spring washer
(M5x10) x4 pieces
Hexagonal nut
(M5) x4 pieces
Ultra low head
screw (M6x15L)
400h : 6 pieces
1000h : 10 pieces
Hexagonal socket
head cap bolt
(M6x15L) x4 pieces
Spring washer
(M6) x4 pieces
Flat washer
(M6) x4 pieces
Attachment to wall
Floor attachment
bracket
Floorboard
Hexagonal Phillips
head bolt (M6x40)
Hexagonal nut
Anchor bolt
Floor attachment
bracket
Floorboard
Hexagonal Phillips
head bolt (M6x40L)
Hexagonal nut
Anchor bolt
Baseboard
baseboard
＊
The type of anchor nuts and bolts required for attaching to the floor will differ depending on the floor s material. Purchase separately.
Floor attachment bracket x4
Floorboard x4
Hexagonal Phillips head bolt
(M6x40) x8 pieces
Hexagonal nut x8 pieces
Shelf
[Low type]
Assembly Guide
Shelf Unit
Figure of completed assembly
Caution
●
Secure enough workspace before assembly. Failure to do so may cause injury.
●
Assembly must be conducted by two or more people. Failure to do so may cause injury.
●
Use specified tools for assembly. Improper assembly, such as not completely tightening screws, may cause damage to
the product or cause the product to overturn resulting in injury.
●
Take gloves off when using power tools. Gloves may get caught in tools causing injury.
●
Be careful when handling the ends and backs of parts, and with the gaps between parts. Failure to do so may cause injury.
Safety Instructions
(Make sure to follow these instructions)
This indicates that improper handling may cause injury or property damage.
Caution
●
Ensure that you have all the parts required.
●
Prepare tools for assembly.
●
When you inserting screws, lightly tighten
before completely tightening them.
●
Handle the product with care.
Assembly Preparations
GXC292／2020-10
●
Are bolts completely tightened?
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
●
Are there any scratches, dirt, distortions or malfunctions?
‥‥‥‥‥‥‥‥‥‥‥‥‥‥
●
Are there any packaging materials or trash on the floor?
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Lastly
…
Make sure of the following items when assembling is complete.
Follow the instructions to ensure proper assembly.
Assembly Instructions
Tools
<400H>
<1000H>
1
①
Connect the floor attachment brackets to the corner of the
baseboard and determine the attachment location.
②
Use an oscillating drill to drill a hole into the floor where you plan on
attaching, and attach the anchor bolt.
③
Set the washer on the anchor bolt and mount the frame unit.
④
Adjust the level of the frame unit, attach the hexagonal nut (for
use with M6) to the hexagonal Phillips head bolt (M6x40L) and
mount to the floor attachment brackets.
⑤
Adjust so that the bolt touches the washer and lock with the
hexagonal nut.
⑥
Attach the anchor bolt attachment nut and attach.
Mounting location of floor attachment brackets
＊
Attach to the corner.
Method for attaching to floor
This guide will enable you to properly assemble and use <Lives Shelf>.
Read this guidebook thoroughly and fully understand its content before assembling the product.
Hexagon wrench
(width across
flats 4mm)
Phillips-head
screw driver
Spanner
(13mm)
Electric drill
Make sure that you have all of the necessary parts before assembling.
Components
Make sure that you have all of the necessary parts before assembling.
Components