GXC293／2020-10
Shelf
[High type]
Caution
●
Secure enough workspace before assembly. Failure to do so may cause injury.
●
Assembly must be conducted by two or more people. Failure to do so may cause injury.
●
Use specified tools for assembly. Improper assembly, such as not completely tightening screws, may cause damage to
the product or cause the product to overturn resulting in injury.
●
Take gloves off when using power tools. Gloves may get caught in tools causing injury.
●
Be careful when handling the ends and backs of parts, and with the gaps between parts. Failure to do so may cause injury.
●
Ensure that you have all the parts required.
●
Prepare tools for assembly.
●
When you inserting screws, lightly tighten
before completely tightening them.
●
Handle the product with care.
●
Make sure there is about 300mm of space from the
ceiling to assemble the product from above
Assembly Preparations
Safety Instructions
(Make sure to follow these instructions)
This indicates that improper handling may cause injury or property damage.
Caution
Assembly Guide
Shelf Unit
Figure of completed assembly
●
Are bolts completely tightened?
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
●
Are there any scratches, dirt, distortions or malfunctions?
‥‥‥‥‥‥‥‥‥‥‥‥‥‥
●
Are there any packaging materials or trash on the floor?
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Lastly
…
Make sure of the following items when assembling is complete.
Attachment to wall
Wall
Wall
When attaching perpendicularly to the wall
When attaching parallel to the wall
Purchase screws
for this separately.
Self-threading
flat head
screw
(M4x8L)
Wall
attachment
brackets
Self-threading flat head
screw (M4x8L) x4 pieces
Wall attachment brackets x2
＊
The type of screws required for attachment to the wall will differ depending on the wall s material. Purchase screws for this separately.
Follow the instructions to ensure proper assembly.
Assembly Instructions
Upper frame x1
Shelf x5
Side frame x2
Baseboard x2
Z bracket x4
Extension frame x4
Connector
bracket x4
Bracket x2
Self-threading
pan head screw
(M5x10L) x16 pieces
Ultra low
head screw
(M6x15L) x16 pieces
Hexagonal socket
head cap bolt
(M6x15L) x4 pieces
Hexagonal socket
head cap bolt
(M8x20L) x4 pieces
Special screw
(M6x12L)
x8 pieces
Ultra low head
screw (M6x15L)
x4 pieces
Hexagonal socket
head cap bolt
(M8x16L) x2 pieces
〈Shelf Unit (2236H)〉
Tools
Hexagon
wrench
(width across
flats 4mm)
Phillips-head
screw driver
Spanner
(13mm)
Electric drill
Stepladder
This guide will enable you to properly assemble and use <Lives Shelf>.
Read this guidebook thoroughly and fully understand its content before assembling the product.
1
①
Attach the wall attachment brackets using the self-threading
flat head screws M4 by screwing them into the 2 holes on
the top of the upper frame.
②
Attach the wall attachment brackets to the wall.
Method for attaching to wall
Make sure that you have all of the necessary parts before assembling.
Components
Make sure that you have all of the necessary parts before assembling.
Components