3 Operation
3.1 Remote control
Press only one button at a time. Pressing two or more buttons simultaneously may
cause a malfunction.
The cooling unit will beep when it has received a signal from the remote control. If the
signal does not reach the unit for some reason, there will be no beep.
Layout
Pos.
Function
1
Screen
2
Fan speed
3
Mode setting
4
Econo function
5
Sleep function
6
Turbo function
7
Brightness
adjustment and
keylock
8
Clock setting
Pos.
Function
9
Room temperature
setting
10
Power On/Off
11
Timer Off and Off
12
Quiet function
13
Air flow vane
14
Air flow direction
15
Reset button
Batteries
The batteries (2 pcs, AAA) are under a sliding lid at the lower section of the remote
control. To fully remove the sliding lid, lift slightly from the top middle part of the lid and
slide downwards. Place the batteries the right way around. Reinstall the sliding lid.
● The batteries will last for around 1 year.
● Do not use rechargeable batteries.
● If the unit will be out of use for an extended period of time, remove the batteries.
M8014 2337EN
9 (20)