SonarMite v3.0 (c)2009 Lymtech LLC
Page 14
6/13/2009
APPENDIX
SonarMite Settings
The SonarMite when connected via Bluetooth to a serial communications program
such as Hyperterminal has a basic set of simple single „control‟ character commands
used to set the basic parameters of the instrument.
Flash Memory
The instrument contains an area of configuration data held within its semi-permanent
FLASH memory area. On running the instrument this data is copied into the current
working RAM area of the processor. Pressing any of the configuration command
characters will only change the current active RAM states enabling the user to sample
output until the „Save‟ command is used to store the current settings and make them
the new defaults when the system is rebooted. Some of the more dangerous settings
have been purposely moved to a system menu to prevent their accidental use.
