OHAUS V12P15T-M, Инструкция по эксплуатации

Страница: 12 / 140

EN-10 Valor
TM
1000 Series
- After the scale shows
--C--
, the calibration mass value (a Midpoint
weight) will be shown in the screen. Place weight(s) of shown value and
press
Yes .
- The scale shows
--C--
, then the calibration mass value (a span weight)
will be shown in the screen. Place weight(s) of shown value and press
Yes .
- The scale shows
--C--
. Once the linearity calibration is completed
successfully, the scale displays
Done
and exits the user menu
automatically.
If incorrect calibration masses are used, the scale displays
Cal E
and exits the
user menu automatically.
To abort calibration at any point, press No .
End [
End
]
Press Yes to move to the next Menu, or press No to return to Span calibration.
4.2 Light
[
L.I.G.H.t
]
This sets the operation of the display's backlight.
ON = always on
OFF = always off
AUTO = Turns on when a button is pressed or the displayed weight changes.
Alternatively, turns off the backlight when the displayed weight does not change for
more than 10 seconds.
4.3 Unit
[
U.N.I.t
]
The Valor 1000 allows one weighing unit to be used at a time. Units can be
changed in this menu. Availabel units vary for different regions or models.
Unit Display
Gram g
Kilogram kg
Pound lb
Ounce oz
Pound:Ounce lb:oz
Press Yes to enter the Unit menu. The currenly used weighing unit will be shown.
To change the unit, press No to move to the next unit.
Press Yes to set the displayed unit to the weighing unit and exit the Unit menu.