OHAUS UNIVERSAL H-STAND, Руководство по установке

Страница: 9 / 32

9
STEP 5
n° pieces Description Image part Assembly
1
Washer
M6
1
Screw
M6x30
1 Washer
M10
1
Arm for
Universal
H-Stand
1
Arm for
Tescopic
H-Stand
1
Pre-
assembled
H-Stand
(Step 4)
1
Screw Driver
NOT
SUPPLIED
3. Installation

Follow this safety instruction described in this manual.

Install the device on a flat, stable, clean, non slip, dry and fire-resistant surface.

With the adjustment knob with screw (Pos. 3 fig. 1) it is possible to level on an uneven surface.

With the lock nut it is possible to lock the adjustment knob with screw.

Prior to each use, always check the device is in good operating condition.

Use Double clamp properly to fix the stirrer correctly.

Use Double clamp and Ribbon clamp properly to fix the container (Beaker with sample) correctly.

Check the correct position of stirrer to avoid the danger of tipping over.

Respect the max permissible load as described in the “Technical data” in this manual.