Additional Instructions
Scout
SJX Balances
Ohaus Corporation www.ohaus.com
i
Scout
SJX Balances
UNPACKING
Carefully remove your Scout balance and each of its components from the
package. Store the packaging material to ensure safe storage and future transport.
Included Components:
Balance
Pan
User Guide &
Instructions
Calibration Mass (only for SJX/E models with 64g
capacity)
Warranty Card
Scoop (only for models with 64g capacity)
AC Adapter & Plug
CALIBRATION
When the balance is operated for the first time, a calibration is recommended to
ensure accurate weighing results.
External Span Calibration
With balance turned on:
Step-1
Press and hold
Menu
until [
mMeNU
] (Menu) is displayed.
Step-2
Release the button, the display will show [
C.A.L
].
Step-3
Press
Yes
to accept. [
SpaN
] will then be shown.
Step-4
Press
Yes
to begin the span calibration. Zero reading is stored
automatically.
Step-5
Place the specified span calibration mass on the pan. Then, press
Yes
to accept the weight or
No
to select an alternate weight.
[
--C--
] will be displayed while the reading is stored
The display will show [
done
] if the calibration was successful. The
balance returns to the previous application mode and is ready for use.
Internal Calibration (not available for SJX/E models)
With balance turned on:
Step-1
Press and hold
Menu
until [
mMeNU
] (Menu) is displayed.
Step-2
Release the button, the display will show [
C.A.L
].
Step-3
Press
Yes
to accept. [
In.CAL
] will then be shown.
Step-4
Press
Yes
to begin the Internal calibration. Zero reading is stored
automatically.
Step-5
Pull the InCal handle while the display show
[
PULL
].
Step-6
Push the InCal handle while the display
show [
PUSH
].
Step-7
Repeat the step-5, and step-6 one more
time.
Step-8
The display will show [
done
] if the calibration was successful. The
balance returns to the previous application mode and is ready for use.
Visit www.balances.com for balances, scales & calibration weights
