OHAUS Guardian 3000, Инструкция по эксплуатации

Страница: 31 / 196

Guardian
TM
Hotplate-Stirrers EN-29
4.7. Reset to Factory Default Settings
Resetting the unit to Factory Default Settings will do the following:
•
Clear all Single Point Calibration (SPC) temperatures.
•
Turn off Power Recovery .
•
Re-enable the beeper setting.
1. To reset the unit to factory default settings, the unit must first be in the top
level of the settings menu. Please refer to
Accessing / Exiting Section for
how to enter the top level menu.
2. Rotate the left knob to scroll to the
SYS
(System) setting.
3. Briefly press the left knob to enter the System settings menu.
4. Rotate the left knob to
rSEt
(Reset).
5. Briefly press the left knob to enter the menu.
6. Rotate the left knob to scroll to the desired setting.
Yes
for resetting and
NO
for
not resetting.

