OHAUS Defender i-DT61PW, Инструкция по эксплуатации

Страница: 49 / 68

Defender 6000 Indicators EN-47
4.9.2 Input
The input I/O’s function is defined below.
4.9.3 Output
4.10 Lock Key Configuration
This menu
L.O.C.k
is used to lock access to certain keys. When you select ON for one selection, the associated
key press will be ignored.
If you select Lock All Keys, you will lose function of all keys. To unlock, long press the Menu key for 30
seconds to enter the settings to unlock it.
Item Available Settings
(bold is the default settings)
Lock All Keys
[ L.ALL ]
OFF, ON
Lock Off Key
[ L.OFF ]
OFF, ON
Lock Zero Key
[ L.ZErO ]
OFF, ON
Lock Print Key
[ L.PrINt ]
OFF, ON
Lock Unit Key
[ L.UNIt ]
OFF,
ON
Lock Mode Key
[ L.mModE ]
OFF,
ON
Lock Menu Key
[ L.mMeNU ]
OFF,
ON
Lock Tare key
[ L.tarE ]
OFF,
ON
Lock Target key
[ L.tArGE ]
OFF,
ON
Lock Numeric Key
[ L.NUmM ]
OFF,
ON
Reset NO, YES
Note: If the Menu key has been locked, long press the Menu key for 30 seconds to enter the settings to unlock
it.
OFF
The input connection is disabled.
ZErO
The external input initiates a Zero function
tArE
The external input initiates a Tare function
CLr.tAr
The external input initiates a Clear Tare function
PrINt
The external input initiates a Print function
UNIt
The external input initiates a Unit function
ACCUmM
The external input initiates an Accumulate function
StArt
The external input initiates a Start function
rESEt
The external input initiates a Reset function
StA-SP
The external input initiates a Start function, the second external input initiates a Stop
function.
PA-rE
The external input initiates a pause function, the second external input initiates a
resume function.
OFF
The output connection is disabled.
OU.LOAD
If the weight is overloaded, the instrument will perfom a relay output.
UN.LOAD
If the weight is underloaded, the instrument will perfom a relay output.
over
If the weight is above the over value you set, the instrument will perfom a relay output.
UNDEr
If the weight is below the under value you set, the instrument will perfom a relay
output.
ACCEPt
If the weight is within the acceptable range you set, the instrument will perfom a relay
output.
UN-OU
The weight value is below the under value or above the over value you set, the
instrument will perfom a relay output.
F.SP1 ,
The weight value is >=SP1, the instrument will perfom a relay output.
F.SP2
The weight value is >=SP2, the instrument will perfom a relay output.
F.SP3
The weight value is >=SP3, the instrument will perfom a relay output.
F.SP4
The weight value is >=SP4, the instrument will perfom a relay output.