OHAUS Courier 7000, Инструкция по эксплуатации

Страница: 59 / 63

Courier 7000 EN-55
11.3 OHAUS Commands
Commands listed in the following table will be acknowledged by the scale.
The scale will return “ES” for invalid commands.
Please add \r\n after each command to send
（
\r refers to \return ; \n refers to \newline)
OHAUS Commands
Command Function
P Print displayed weight (stable or unstable).
IP Print displayed weight immediately (stable or unstable).
CP Print weight continuously.
SP(0-60) Print weight when stable.
Z Same as pressing Zero Key.
T Same as pressing Tare Key.
TA Set/inquiry of tare weight value.
• Set: TA tare value unit
Example: TA 5 kg
•
Inquiry: TA
U
Set/inquiry current display unit.
• Set: U unit ID
Example: U 1
Please check the following table 11-5 for the ID of each unit.
• Inquiry: U
M
Set/inquiry current application mode.
•
Set: M application
ID
Example: M 0
Please check the following table 11-6 for the ID of each application.
• Inquiry: M
PSN Print terminal's serial number.
PV Print name, software revision and LFT ON (if LFT security switch is turned ON).
H x "text"
Enter print output string, x = string number (1-5), "text" = string text up to 40 alphanumeric
characters.
F x "text"
Enter Footer String content, x = string number (1-2), "text" = string text up to 40
alphanumeric characters.
NOTE :
• The italic content in each command needs to be filled with actual value.
• Space in each command is needed. Please pay attention to it when input commands.
Unit ID Unit Name Abbreviation
0 Gram g
1 Kilogram kg
7 Pound lb
8 Ounce oz
20 Pound:Ounces lb:oz
Application ID Unit Name
0 Weighing
4 Dynamic
6 Totalization
18 Weight Alert
Table 11-5 Unit ID Table 11-6 Application ID