OHAUS Courier 7000, Инструкция по эксплуатации

Страница: 14 / 63

EN-10 Courier 7000
2.4 Leveling the Equipment
To ensure accuracy, proper performance and safety, locate and operate the base on a stable, level surface.
Avoid locations with rapid temperature changes or excessive dust, air currents, vibrations, electromagnetic
fields or heat.
Level the base by adjusting the four leveling feet until the bubble in the level indicator is centered. A wrench
may be needed to loosen the locking nut above each leveling foot. When the base is level, retighten the
locking nuts up against the base to lock each foot into place.
NOTE : Ensure that the base is level each time its location is changed.
Correct Incorrect