OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
33
Software
Calibration History
On the Calibration History Screen, you can retrieve the data from all past
calibration tests.
1.
Begin on the Main Screen. Select “Calibration History” from the “Utilities”
menu.
2. The calibration tests are grouped by month. Select the folder for the year
and month of the calibration test you are looking for and click the small +
sign next to it. This will show you all of the calibration tests run that month,
including the fluid batch and any comments you added after the test.
3.
Select the test you wish to view and click the “OK” button.
4.
You can now see the graph, chart, and fluid batch details.
5.
Click the “Export” button if you wish to export the calibration results to a
file. You will be asked to select a filename and destination and then click
“OK”.
6.
When viewing a calibration, you can click the “Make this Cal Active”
button to activate the calibration and apply it subsequent test data.
Calibration History Explorer
Calibration History
