Interruption of a measurement
If it is necessary to interrupt a measurement for some reason (for example, if the
patient is not feeling well), the START / STOP button can be pressed at any time. The
device immediately decreases the cuff pressure automatically.
Memory: recall of measurements
This blood pressure monitor automatically stores the values of the last 90
measurements for 2 people (2x90). The oldest record is automatically replaced by the
last measurement value, when there are more than 90 measurements for a user.
Read measurements stored in memory
Press MEM button when power off, the average value of the last 3 measurements will
be displayed.
Press the MEM button again, the last measured value will then be displayed.
The previous measurements can be displayed one after the other by successively
pressing the MEM button.
About blood pressure
Clear data from memory
If you are sure you want to permanently delete all stored memories, press the SET
button 7 times until CL appears when powering off.
Then press the START / STOP button, CL will flash 3 times to erase all memories.
After that, press the MEM button, and "no" will show on the screen, which means
the memory has been emptied
About blood pressure
Blood pressure is the pressure exerted on the arteries. The systolic blood pressure
value represents the blood pressure produced by the contraction of the heart muscle.
The diastolic blood pressure value represents the blood pressure produced by the
relaxation of the heart muscle.
Heart muscle
contraction
Extrude blood
Pressure increases
to the blood vessels
Higher pressure
Relaxation of the heart
muscle
Blood returns to heart
Pressure decreases to
the blood vessels
Lower pressure
