93720
MANAGER’S CHAIR
OPERATING INSTRUCTIONS
© Office Star Products janvier 2020
93720
FAUTEUIL DE DIRECTION
INSTRUCTIONS DE MONTAGE
PIÈCE QTÉ
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Roulettes . . . . . . . . . . . . . . . . . . . . 5
3.
Vérin pneumatique . . . . . . . . . . . . 1
4.
Mécanisme . . . . . . . . . . . . . . . . . . 1
5.
Coussin du siège . . . . . . . . . . . . . . 1
6.
Dossier . . . . . . . . . . . . . . . . . . . . . 1
7.
Bras (7L et 7R) . . . . . . . . . . . . . . . 2
8.
Rondelles plates . . . . . . . . . . . . . . 3
9.
Support . . . . . . . . . . . . . . . . . . . . . . . 1
10.
Vis du mécanisme . . . . . . . . . . . . 4
11.
Vis du support du dossier . . . . . . 4
12.
Bouton et rondelles . . . . . . . . . . . . 2
13.
Vis du dossier . . . . . . . . . . . . . . . 3
14.
Support du dossier . . . . . . . . . . . 1
15.
Couverture plastique . . . . . . . . . . 1
16.
Clé Allen (non montré) . . . . . . . . . 1
WARNING
1 . Use this product only one person at a time .
2 . Do not use this chair unless all bolts screws and
knobs are securely tightened .
3 . Check that all bolts screws and knobs are tight every
three months or as needed .
4 . Do not overturn back tilt knob when decreasing
tension .
5 . Dispose of packing material properly . Do not use
plastic cover as head covering . It may cause
suffocation .
6 . Do not use chair as a stepladder .
7 . Use this chair for its intended purpose only .
8 . Use mild detergent only for cleaning .
LIMITED WARRANTY
Pro-Line II chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory.
Return freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric and foam is warranted for one year.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry . Sometimes, no matter how hard we try, there are times when parts
are damaged or missing . Our Parts Department will do everything possible to promptly remedy the problem . Contact us via e-mail
by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a .m . - 5:00
p .m . Pacific Time .
FEATURES
•
PNEUMATIC SEAT HEIGHT
ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1) up.
To lower seat height sit on chair and lift lever (1) up.
• TILT TENSION ADJUSTMENT
To adjust title tension, Turn knob (2) clockwise to increase
tension and counter-clockwise to decrease or ease the tension.
NOTE:
Be careful not to completely loosen knob (2).
• BACKREST LOCKING ADJUSTMENT
Turn knob (3) clockwise to lock backrest position.
Turn knob (3) counter-clockwise to unlock backrest into position.
• SEAT SLIDER ADJUSTMENT
To slide seat forward or backward, lift lever (4) up. Release
lever (4) to lock desired seat position.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (5) to allow the arms to move
up or down freely. Release button (5) once the desired
height is reached.
MECHANISM OPERATING INSTRUCTION
WHILE SEATING :
(A) PNEUMATIC SEAT HEIGHT ADJUSTMENT
:
Lift to adjust seat height.
(B) TILT TENSION ADJUSTMENT KNOB
:
Turn clockwisr to increase tilt tension and
counter clockwise to decrease.
(Pull knob (B) out for easy operation)
(C) BACKREST LOCKING CONTROL KNOB
:
Turn clockwise to unlock backrest in position
and counter clockwise to lock.
(Pull knob (B) out for easy operation)
(D) SEAT SLIDE CONTROL LEVER
Lift lever up to slide and relase once desirable
position is reached.
2
Fron
t
Rear
1
3
4
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que
les quantités des pièces sont correctes.
ÉTAPE 1
Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu’à ce que vous entendiez ou sentiez la roulette (2) s’enclencher. Insérer le
vérin pneumatique (3) dans la base (1).
ÉTAPE 2
Fixer les bras (7L et 7R) au support (9) en utilisant un bouton et rondelles (12) pour chaque bras (7).
SERREZ TOUTES LES BOUTON (8).
ÉTAPE 3
Fixer le mécanisme (4) au coussin du siège (5) avec vis du mécanisme (10).
SERREZ TOUTES LES VIS.
ÉTAPE 4
Fixer le support du dossier (14) au dossier (6) avec vis du support du dossier (11), fixer le support du dossier (14) au mécanisme (4) avec trois
rondelles plates (8) et trois vis du dossier (13),
SERREZ TOUTES LES VIS DU DOSSIER (13).
fixer le couverture plastique (15) au mécanisme (4).
ÉTAPE 5
Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
5
15
1
2
3
4
5
9
6
7L
7R
13
8
10
14
11
12
12
