manualshive.com logo in svg

OETIKER ELK 02 Series, Инструкция по эксплуатации, Страница: 12 / 144

Поделиться
Скачать
OETIKER ELK 02 Series Скачать руководство пользователя страница 12

OETIKER ELK 02 V2.X

2 

Basic safety instructions

Issue 05.2021

08903352

2-12

Spare parts

In order to ensure the fast and accurate delivery of spare parts, a clear purchase order is essential. It must include 
the following information: 
• 

Product name, software version

• 

Type designation

• 

Serial number

• 

Name of spare part and number of units required

• 

Spare part number

• 

Shipping method

• 

Full address

Details can be found in the OETIKER tools catalog.

Improvements to the machine

In our endeavor to continuously improve the quality of our products, we reserve the right to make improvements 
without changing the instruction manual. Details of dimensions, weights, materials, performance ratings and names 
may therefore be subject to necessary changes. Regarding electrical diagrams, the diagram supplied with the 
machine takes precedence in all cases.

2.4  Special safety instructions

Only specially trained personnel are authorized to carry out maintenance and repair work on pneumatic equipment. 

 

 Depressurize the machine’s pneumatic equipment before starting maintenance or repair work. 

 

 Check hoses for wear as part of the preventive maintenance routine and replace them if necessary.

2.5  Safe working practices

 

 Before each start of production, check the ELK 02 for visible damage and only use it if it is in perfect 
working order. 

 

 Any defects must be reported to a supervisor immediately.

 

Do not continue to use the ELK 02 if defects have been identified.

2.6  Modifications, changes

• 

 No design or safety modifications may be made to the ELK 02 without our express authorization. We 
shall not be held liable for damage resulting from any modifications. In particular, repairs of any kind are 
prohibited.

• 

 The securing screws on the control unit and the ELK 02 pincer are sealed with lacquer. If the lacquer is 
damaged, OETIKER cannot accept any claims under warranty. 

• 

 Use only original spare parts and accessories.

• 

 Do not dismantle any safety equipment.

Содержание ELK 02 Series

















































































































































Отзывы:

Нет отзывов