manualshive.com logo in svg

OETIKER ELK 02 Series, Инструкция по эксплуатации, Страница: 11 / 144

Поделиться
Скачать
OETIKER ELK 02 Series Скачать руководство пользователя страница 11

OETIKER ELK 02 V2.X

2 

Basic safety instructions

Issue 05.2021

08903352

2-11

2 

Basic safety instructions

2.1  Using the instruction manual

• 

 Make sure that this instruction manual is always kept close at hand ready for use.

• 

 Pass on this instruction manual to the next owner.

• 

 Please read through the instruction manual carefully before operating the ELK 02 unit. Familiarize yourself 
with all settings and their functions. Anyone involved in setting up, commissioning, maintaining or repairing 
the unit must have read and understood the instruction manual and in particular the safety instructions.

2.2  Use for the intended purpose

The unit may only be used for the intended purpose and under technically safe and fault-free conditions.
The ELK 02 and associated OETIKER pincers are intended solely for the controlled closure of OETIKER clamps and 
Low Profile Clamps. 
Use for the intended purpose also covers observance of this instruction manual and compliance with the technical 
data.
Any use not in accordance with the intended purpose is regarded as incorrect.
Use other than for the intended purpose
The ELK 02 has been developed in accordance with the best available technology and is safe for use. Residual 
dangers remain if it is used incorrectly or by untrained personnel. The operator of the ELK 02, not the manufacturer, 
shall be held responsible for any personal injury or property damage arising from incorrect usage.

2.3  General safety instructions

• 

 Observe all operating and maintenance instructions.

• 

 Maintenance and repair work should always be carried out by qualified specialists.

• 

 The ELK 02 unit may only be used by people who are familiar with its use and have been informed of the 
risks.

• 

 All relevant accident prevention regulations and other generally recognized health and safety rules must 
be complied with. The manufacturer shall not be held liable for damage resulting from unauthorized 
modifications to the ELK 02.

Содержание ELK 02 Series

















































































































































Отзывы:

Нет отзывов