OETIKER CC 20 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 58

OETIKER CC 20 Скачать руководство пользователя страница 13

Clamp pincer CP 10 / CP 20 / CC 20

3 Overview

Issue 06.19

08902961

3-13

3

Overview

3.1

System overview

•

The pincers enable flexible, cordless and precise installation of OETIKER ear clamp models and MCRs.
They ensure high repeatability of the closure force and enable far-reaching process monitoring with easy
setting of the closure parameters.

•

The pump bodies and all operating parts are made of high-strength materials and have been rigorously
tested.

•

The pincer housing is made of glass-filled insulating and shock-resistant polyamide.

•

The device is designed to be ergonomic, compact and robust.

•

The device has a high return supply volume, for quicker operating cycles.

•

The software supplied allows the process data to be displayed on a PC.

•

The device is equipped with a microcontroller control system.

•

Pressure monitoring is performed by an electronic pressure sensor.

•

The level of battery charge is monitored continuously.

•

Service management is monitored electronically.

•

The traceability of the operating cycles is ensured by automatic recording and saving of the process data in
an internal memory. A maximum of approx. 100,000 operating cycles can be saved.

•

A mini USB port allows the saved data to be read, settings performed and software updates performed.

•

Additional LED displays for quick info regarding machine status and process results.

•

High availability due to long maintenance intervals (maintenance necessary every 100,000 closures).

The overall design of the CP 10 / CP 20 / CC 20 cordless clamp pincer system consists of the following main
components:

1

Cordless clamp pincer CP 10 /
CP 20 / CC 20

2

PC with installed software (PC
not included in scope of supply)

3

Accessories

Fig. 1:

Structure of entire system CP 10 / CP 20 / CC 20

«
...
11
12
13
14
15
...
»

Содержание CC 20



























































Отзывы:

Нет отзывов