OERTLI OS 4, Руководство по обслуживанию

Страница: 20 / 151

2021-03-23 / Rev. 10 VV016042 20
7. The converted database has been stored
at the place of origin (normally on the
USB stick). The original database has
been stored as a backup copy with the
ending of the corresponding scheme ver-
sion.
8. The software of the device can now be
updated to software package 1.5.x
(

12).
9. Following a successful software update,
the converted database has to be loaded
into the device according to

7.2.
8.1.3 Procedure for converting a database from a device with SW version 1.3.0
The conversion tool requires that following a software update to SW 1.3.0 all pedal assignments must be re-
selected for the surgeon memories that have been used. If a database is to be converted that has not previ-
ously undergone this process, a single option is offered to set back to default all pedal assignments of a sur-
geon, of which the pedal assignments have not been reselected.
1. Export surgeon database from device
with SW 1.3.0 to USB according to

7.2.
2. Insert the USB stick containing the
exported surgeon database into the
USB port of your laptop.
3. Start the software for the conversion
of the surgeon database.
(OS 4_Database_Conversion.exe)
4.
Click on the „Browse db-files“ button
and select exported database.
5. After successful loading of the file
(Status „File loaded“), start the con-
version process by clicking on „Start
conversion“.
6. If none of the laser pedal assign-
ments have been correctly set, a
popup window will open up, in which
laser pedal assignments are as-
sessed.

Valid laser pedal assignments:
For these surgeons, the laser
pedal assignments (sections
and buttons) have been cor-
rectly set.

Invalid laser pedal assignments:
For these surgeons, the laser
pedal assignments (sections or
buttons) have not been correctly
set.
There are two possibilities of how to
proceed:

Click on the button “Replace in-
valid laser assignments by de-
fault”: Only invalid laser pedal
assignments will be replaced by
the corresponding default set-
tings.