110 Box
110 box and Box Buddy with
alignment tool in place
OEM Systems Company, Inc.
740 Freeport Blvd., #106 Sparks, NV 89431-6168
775 355-0405 Fax 775 355-0646
www.oemsystems.com [email protected]
Product materials & specifications are subject to change / improvement
Box Buddy low voltage mounting rings are
designed for positioning low voltage devices
next to 110 VAC electrical boxes with stan-
dard NEC spacing so that the combined 110
and low voltage device(s) may be covered
with one multi-gang coverplate for an
elegant appearance. The Box Buddy uses a
patent pending pull-off alignment tool that
makes combined installation and alignment
of 110 VAC and low voltage devices simple
and quick.
Box Buddy low voltage mounting rings
feature conduit flanges off-set by 5/8" which
enable un-obtrusive use of conduit connec-
tors (see photo bottom of page on reverse).
Box Buddy
BB-11
BB-12
BB-21
BB-22
Pull-off alignment tool
Add 1 Low Voltage device to a 1 gang 110 VAC Box
Add 2 Low Voltage devices to a 2 gang 110 VAC Box
Add 1 Low Voltage device to a 2 gang 110 VAC Box
Add 2 Low Voltage devices to a 1 gang 110 VAC Box
Low Voltage Mounting Rings