OEM Tools 24812 Скачать руководство пользователя страница 1

UNPACKING

After unpacking unit, inspect 
carefully for any damage that may 
have occurred during transit. Check 
for loose, missing, or damaged 
parts. If any damage is observed, 
a shipping damage claim must be 
filed with carrier.  Do not use Shop 
Press if broken, bent, cracked or 
damaged parts (including labels) are 
noted.  Any Shop Press that appears 
damaged in any way, operates 
abnormally or is missing parts should 
be removed from service immediately.  
If you suspect that the Shop Press 
was subjected to a shock load (a 
load that was dropped suddenly, 
unexpectedly, etc.) immediately 
discontinue use until it has been 
checked by a factory authorized 
service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect 
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions 
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

Operating Instructions and Parts Manual 

24812

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

[email protected]

20 TON AIR/MANUAL SHOP 

PRESS W/ GAUGE

Explanation of Safety Signal Words

CAUTION

Notes

CAUTION

WARNING

The following safety information is provided as guidelines to help you operate your 20 Ton Air/Manual Shop Press w/ 
Gauge under the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when 
safety or safe handling instructions are not known or not followed. The following safety instructions are to provide 
the user with the information necessary for safe use and operation. Please read and retain these instructions for the 
continued safe use of your service system. Failure to follow instructions listed below may result in serious injury. In 
addition, make certain that anyone that uses the equipment understands and follows these safety instructions as well. 

WARNING

  

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

WARNING

: Indicates a potentially hazardous situation which, if not avoided, could result in death or 

serious injury.

: Indicates a potentially hazardous situation which, if not avoided, may result in minor or 

moderate injury.

: Used without the safety alert symbol indicates a potentially hazardous situation which, if 

not avoided, may result in property damage. 

: Provide clarity and helpful information.

09/14

2014 ©OEM-TOOLS

Содержание 24812











Отзывы: