background image

2

Operating Instructions and Parts Manual 

24646

5/19

2019 OEMTOOLS

RECHARGEABLE SLIM  

INSPECTION LIGHT

 

IMPORTANT INSTRUCTIONS  

 

AND SAFETY RULES

1.  Know your product. Read this manual carefully. Learn 

the product’s applications and limitations, as well as 

potential hazards specific to it.

2.  Keep work area clean and well lit. Cluttered or dark 

work areas invite accidents.

3.  Keep children away. All children should be kept away 

from the work area. Never let a child handle tools or 

equipment without strict adult supervision.

4.  DO NOT use the work light if the switch does not turn it 

on and off. Any tool that cannot be controlled with the 

switch is dangerous and must be repaired.

5.  Although eye damage from the OEMTOOLS

 Light is 

unlikely, never stare directly into the beam.

6.  DO NOT attempt to recharge the battery by any other 

means than USB, via the cable provided. 

7.  DO NOT use this product if under the influence of 

alcohol or drugs. Read warning labels on prescriptions 

to determine if your judgment or reflexes are impaired 

while taking drugs. If there is any doubt, DO NOT 

attempt to operate.

8.  DO NOT overreach. Keep proper footing and balance 

at all times when operating this product.

9.  Check for damage. Check equipment regularly. If part of 

the product is damaged, it should be carefully inspected 

to make sure that it can perform its intended function 

correctly. If in doubt, discontinue use of the product.

10. Keep this product dry and clean.
11. Use only accessories that are recommended by the 

manufacturer for your model. Accessories that may be 

suitable for one product may become hazardous when 

used on another product.

12. Service must be performed only by qualified repair 

personnel. Service or maintenance performed by 

unqualified personnel could result in a risk of injury.

13. When servicing a product, use only identical 

replacement parts. Use of unauthorized parts or 

failure to follow maintenance instructions may create 

a risk of injury.

14. Maintain a safe working environment. Keep the work 

area well lit. Make sure there is adequate surrounding 

workspace. Keep the work area free of obstructions, 

grease, oil, trash, and other debris. DO NOT use this 

product in a damp or wet location.

15. Maintain labels and nameplates on this product. These 

carry important information. If unreadable or missing, 

contact OEMTOOLS

 for a replacement.

16. Keep this product dry, clean, and free from brake fluid, 

oil, and grease.

17. Avoid accidental fire. DO NOT smoke near this product.
18. We believe the information contained herein to be 

reliable. However, general technical information is given 

by us without charge and the user shall employ such 

information at their own discretion and risk. We assume 

no responsibility for results or damages incurred from 

the use of such information in whole or in part. Always 

refer to specific instructions and technical information 

supplied by vehicle manufacturer. 

19. The procedures documented in this manual are to 

serve as guidelines for the use of this equipment.

20. The use of this equipment is simple and straightforward 

if you follow the instructions. When operating this 

equipment, use common sense, and only use this 

equipment for its intended purpose.

21. DO NOT submerge this product in water or other 

liquids. 

22. Keep the light away from medical and electronic 

devices. Strong magnets in light could cause damage 

to some devices.

NOTE: 

The manufacturer declines any and all 

responsibility for damage to vehicles or components if 

said damage is the result of unskillful handling by the 

operator or of failure to observe the basic safety rules set 

forth in the instruction manual.

WARNING

:

 

Carefully read Rules for Safe Operation 

and Instructions. 

IMPORTANT SAFETY INSTRUCTIONS

The warnings, precautions, and instructions discussed 

in this manual cannot cover all possible conditions 

and situations that may occur. The operator must 

understand that common sense and caution are factors 

which cannot be built into this product but must be 

supplied by the operator. 

DISPOSAL

At the end of the useful life of the OEMTOOLS

 

Rechargeable Slim Inspection Light, dispose of the 

components according to all state, federal and local 

regulations. 

BATTERY DISPOSAL

Exposure to high temperatures can cause the batteries 

to explode; DO NOT dispose of in a fire. Some countries 

have regulations concerning battery disposal. Follow 

all applicable regulations. Return used batteries to a 

collection location for recycling. Call 800-822-8837 or 

visit www.call2recycle.org to find a collection location. 

CHARGING

Fully charge the battery before first use. 

PURPOSE

The OEMTOOLS

 24646 Rechargeable Slim Inspection 

Light is designed to light work areas, provide temporary 

lighting for outdoor recreation activities such as camping, 

and offer emergency lighting in a power outage situation. 

Отзывы: