OEC 9800 Periodic Maintenance Procedure
55
Torx Screw Size
Nominal Torque value
Acceptable Range
4-40
6 lbs./in
5-8 lbs./in
6-32
15 lbs./in
13-16 lbs./in
8-32
22 lbs./in
21-24 lbs./in
10-32
30 lbs./in
28-31 lbs./in
Test the Steering
1.
With the C-Arm's wheel brake engaged, turn the right steering handle 90
°
to the left and right. Verify that the
wheels move 90
°
to the left and right.
2.
Place the C-Arm's wheel brake in the neutral (flat) position. Push the C-Arm slowly and verify that when the
steering handle is turned the C-Arm turns.
3.
Place the Workstation's wheel pedal completely up. Push the Workstation and verify that the casters lock in place
and the wheels roll in a straight line.
4.
Place the Workstation's wheel pedal in the center position. Push the Workstation and verify that the wheels and
casters turn freely.
Power ON
1.
Apply Power to the system and verify that the Workstation and C-Arm complete the boot sequence and are
functional.
