OEC 9800 Periodic Maintenance Procedure
5
Unauthorized Modifications
Under no circumstances should the safety interlock in the system be bypassed, jumpered, or otherwise disabled.
Note
:
All GE OEC systems comply with International Electrotechnical Commission safety standard IEC-60601. Do
not connect any external device to the system that does not meet the requirements of IEC-60601. Only
devices provided or approved by GE OEC Medical Systems, Inc. should be connected to the system.
Motorized Mechanical Operation
The Vertical Column is motorized and should be observed continuously during operation to avoid collision with people
and equipment.
If covers are removed, use extreme care when operating motorized features. Do not wear loose clothing that may be
caught by mechanical mechanisms. Keep hands and fingers clear of motorized equipment while the motors are in
operation.
Trained Service Personnel
Serious injury and property damage can result from incorrectly performed service procedures. Observe all operating
and safety procedures discussed in this document.
WARNING
:
Procedures should be performed by service personnel specifically trained by GE OEC Medical
Systems, Inc. to calibrate the OEC 9800 C-Arm and Workstation.
Electrical Shock
WARNING
:
This system can generate lethal voltages. Practice safe electrical testing procedures when
performing periodic maintenance procedures.
