OEC 9800 Periodic Maintenance Procedure
14
Wheels/Casters
1.
Push the C-Arm and verify that the wheels roll smoothly, the casters turn freely and that the wheels are securely
attached to the casters. Visually inspect the wheels for damage.
2.
Push the Workstation and verify that the wheels roll smoothly without vibration and that they are securely attached
to the casters. Visually inspect the wheels for damage.
3.
Verify that the cable pusher blades have not been damaged.
Non-Motorized Movements
Wig Wag
1.
Release the Wig-Wag brake and verify that the forward mechanics move laterally
approximately
±
10
°
(20
°
total).
Flip Flop Rotation (Standard C-Arms only)
1.
Release the Flip Flop brake and verify that the C-arm "flip-flops" through its entire range smoothly without
roughness or vibration.
Radial Rotation
Perform the following to verify radial rotation on Standard C-Arms and Super C-Arms:
1.
On a standard C-Arm release the L-Arm brake and verify smooth rotation without roughness or vibration.
2.
On a Super C-Arm release the radial brake and verify smooth rotation without roughness or vibration.
