OE Max Controls CSDP Plus, Руководство пользователя

Страница: 60 / 254

62
The maximum frequency allowed in the line drive input is 900 kpps,
and the maximum frequency allowed in the open collector input is 250
kpps.
In the open collector type, if TR1 is ON, the servo drive recognizes it as
a low level input logic, and if TR1 is OFF, the servo drive recognizes it
as a high level input logic. Please set the value of R1, so that the input
electric current can be 7 to15 mA.
When the output of the controller is open collector type, it is desirable
to set Vcc to 24V. It is because the system can be operated securely
even in a noisy environment. At this time, please use 2.2 k
Ω
resistor at
R1.
Set the control mode to position control by putting
0 at SEt-41.
Set up the type of position command on the first
digit of SEt-46.
Resistance to Voltage
Voltage (Vcc) Resistance (R1)
24 V
±
5 % 2.2 k
Ω
12 V
±
5 % 1 k
Ω
5 V
±
5 % 180
Ω
Position Command Type Set-up
Set value Logic Multiplication Pulse Type
0 Positive - CW+CCW
1 Negation - CW+CCW
8 Positive - Pulse Train + Sign
9 Negation - Pulse Train + Sign
2 Positive 1 multiplications A Phase + B Phase
4 Positive 2 multiplications A Phase + B Phase
6 Positive 4 multiplications A Phase + B Phase