OE Max Controls CSDP Plus, Руководство пользователя

Страница: 45 / 254

47
Monitor Number List
No. Contents (Unit)
Con-01 Speed Feedback (RPM)
Con-02 Speed Command (RPM)
Con-03 Torque Command (%)
Con-04 Electrical Angle (
°
)
Con-05 Speed Error (RPM)
Con-06 Position Error (pulse)
Con-07 Mechanical Angle (
°
)
Con-08 Position Feedback (pulse)
Con-09 Position Command (pulse)
Con-10 Offset of Analog Speed Command
Con-11 Offset of Analog Torque Command
Con-12 In/Output Signal Status
Con-13 Load Inertia Ratio
Con-16 Frequency of the Position Command pulse (kHz)
Con-17 Analog Speed Input Voltage (10 mV)
Con-18 Analog Torque Input Voltage (10 mV)
Con-19 Maximum Torque Used Until Now
Con-20 Multi-revolution Position of the Absolute Encoder
Con-21 Maximum Position Error (pulse)
Con-22 Maximum Speed (RPM)
Con-23 Encoder Pulse Value After Servo ON
Con-24 One Revolution Position of the Absolute Encoder
Con-29 DC Voltage [V]
Con-30 Instant Output Power [W]
Con-32 Servo Drive Usage Rate [%]