Odyssey THE RIPPER Скачать руководство пользователя страница 1

Страница: 1 / 4

INSTRUCTION MANUAL: THE RIPPER

SETTING UP THE RIPPER

1. Turn off the power switch.

2. Using a phillips screwdriver open the

battery compartment.

3. Connect the battery wire to The

Ripper’s connector as shown on the

diagram.

4. Close the battery compartment and

reinstall the screw.

5. Turn the power switch to On.

FOR

AGES

Power Switch

Содержание THE RIPPER

Страница 1: ...ff the power switch 2 Using a phillips screwdriver open the battery compartment 3 Connect the battery wire to The Ripper s connector as shown on the diagram 4 Close the battery compartment and reinsta...

Страница 2: ...light will turn on to indicate charging When the charger light goes out charging is complete and you can reinstall the battery in The Ripper Controller Functions 1 Using a phillips screwdriver open th...

Страница 3: ...ntrol clockwise to increase maximum speed Tip If The Ripper s steering is too sensitive for your driving style you can adjust the sensitivity The Ripper Max Speed Control Tip If you find The Ripper s...

Страница 4: ...exceed charging volts and amps of 5v1a Do not leave charger connected or charge for more than 1hr Do not submerge the unit in any liquids Keep the unit dry Do not place the unit near powerful un shie...