1
INSTRUCTION MANUAL:
8+
INSTALLING THE RAMPAGING REX’S BATTERIES
SETTING UP THE REMOTE CONTROLLER
ASSEMBLING RAMPAGING REX
FOR
AGES
1. Using a Phillips screwdriver, unscrew the battery cover screw and open.
2. Install 2x AA batteries, taking care to match the correct po/-.
3. Close the cover and tighten the battery cover screw.
The Rampaging Rex is packaged in two sections.
At the two open ends you will see one end with a hole and one end with a
groove.
Simply align the holes and grooves and pop into place.
If you want to separate the two halves for storage press the button in, then
gently pull the two halves apart.
1. Using a Phillips screwdriver,
unscrew the battery cover screw
and open.
2. Install 3x AAA batteries, taking
care to match the correct polarity
+/-.
3. Close the cover and tighten the
battery cover screw.
