http://
www.odotautomation.com
18 / 29
TEL:
+86-0816-2538289
and the terminal before transferring data. When it wants to transfer data, it simply
grabs the data from the application and throws it onto the network as quickly as
possible. At the sending end, the speed at which UDP delivers data is limited only by
the speed at which the application generates data, the capacity of the computer, and
the transmission bandwidth. At the receiving end, UDP puts each message segment
into a queue, and the application reads one message segment at a time from the queue.
1. Open Google browser, and enter 192.168.1.254 to log in to the webpage
configuration interface.
Network config: IP address 192.168.1.254, device port: 502, work mode: UDP, set the
destination IP/DNS to the server IP address to be connected: 192.168.1.51 (IP address
of the local NIC), and remote port number 6000. And it could use TCP debugging
assistant to simulate test for TCP side.
Serial port config: serial port parameters: 19200bps, N81.The Serial Port test tool
Serial Port Utility is used to simulate Serial Port devices.
Multiple Host Config: Select Modbus TCP to RTU mode as the conversion protocol.
Click Submit when the Settings are completed.