OCULUS Myopia Master Basic, Инструкция по эксплуатации

Страница: 53 / 90

13 Chronology of Different Measuring Processes
48 / 84 Instruction Manual Myopia Master® (G/68100/EN Rev08)
1 You can enter a new a patient and save the conducted
measurement under that patient's name.
You must first exit the
patient list.
The patient data management is already opened (fig. 11-1, page 27) .

Create a new patient, as described in sec. 11.1, page 27 .
The newly entered patient appears in the list of patients and is
highlighted in blue.
The conducted examinations are saved in the patient data
management.
You can retrieve the saved examinations at any time (sec. 12.4,
page 44).
2 You can select a patient and save the conducted measurement
under that patient’s name

Exit the character box for entering the patient's data.

Press the “ESC” button on the keyboard.

Select the patient and confirm by pressing the control wheel.

Alternatively use the button “Save to Patient”
The examination data are saved under the selected patient’s name.
The saved examinations can be viewed again at any time (sec. 12.4,
page 44) .
13.3 Measuring Without Saving the Patient Data

Start the measuring operation directly.

Conduct the measurement (sec. 12, page 33) .
When the measuring operation has been completed, the overview
screen appears
(fig. 12-5, page 37) .
Print out the measurement(s) (sec. 12.4, page 44) .
When printed out, each measurement is automatically temporarily
saved to the exam nr. memory
(“Saving data by Exam no. memory”,
page 45) .