OCULUS BIOM 5c, Инструкция по эксплуатации

Страница: 19 / 40

9 Use of the BIOM® 5
Instruction Manual BIOM® 5 (G/55400/1218/en) 15 / 36
9.3 Under Sterile Conditions: Test the Safety Functions
Attention
Risk of injury due to improper function

Only use the BIOM® 5 when the following functions have been
checked and are in proper working order.

Before each use, check that

The unit is in technically perfect condition.

All connections and fasteners that can be loosened are properly
tightened and are in a safe condition.

The dovetail mount for the adaptor is securely fastened at the
microscope.

Flip the BIOM® 5 towards the adaptor plate. Make
sure that the housing body can be shifted without
resistance.

Slide the safety rod of the loupe holder up and
down several times to check that it runs
smoothly.

Check that the knob turns easily and shorten the
total length of the BIOM® 5 until the adjuster is
at the fully up position.

Check whether all fastening screws are present
(e.g. screws at the feather key of the safety rod).
The control mark (1) must be below the guide.
Fig. 9-4: Test the safety functions
1
2
3
1