Step by Step
Enhanced phone functions
52
Removing parties from the conference
Select and confirm the option shown. The first party is displayed.
Confirm as often as required until the desired party appears.
Select and confirm the option shown.
Leaving a conference
Select and confirm the option shown.
or
\
Replace the handset, if this feature is configured (contact your ser-
vice personnel).
Ending a conference
Select and confirm the option shown.
or
\
Replace the handset, if this feature is configured (contact your ser-
vice personnel).
Removing the ISDN central office party from the conference
Select and confirm the option shown.
Activating tone dialing/DTMF suffix-dialing
You can transmit dual-tone multifrequency (DTMF) signals to control
devices such as an answering machine or automatic information sys-
tem.
N
Press the key shown.
Select and confirm the option shown.
j
You can use the keys
0
through
9
,
)
and
(
to trans-
mit DTMF signals.
View conf parties?
Next?
Remove party?
If a participant that was connected to the conference via an
unencrypted line leaves, the conference remains unsecured.
Leave conference?
End conference?
Drop last conf. party?
*53=DTMF dialing?
Ending the call also deactivates DTMF suffix dialing.
Your system may be configured so that you can start DTMF
suffix-dialing immediately after setting up a connection.