Basic functions
23
Step by Step
Answering a call via the loudspeaker
(speakerphone mode)
Suggestions for using speakerphone mode:
• Tell the other party that you are using speakerphone mode.
• The speakerphone works bests at a low receiving volume.
• The ideal distance between the user and the telephone set in
speakerphone mode is about 50 cm (approx. 20 inches).
The phone is ringing. The caller appears on the screen.
Pay attention to the notes on voice encryption
n
Press the key shown. The LED lights up.
if nec.
+
or
-
Raise or lower the volume. Keep pressing the key until the desired vol-
ume is set.
Ending a call
n
Press the key shown. The LED goes out.
or
s
Press the key shown.
Switching to speakerphone mode
Prerequisite: You are conducting a call via the handset.
n \
Hold down the key and replace the handset. Then release the key.
if nec.
+
or
-
Set the call volume. Keep pressing the key until the desired volume is set.
U.S. mode
If the country setting is set to U.S. (ask the service personnel), you do
not have to hold down the loudspeaker key when replacing the hand-
set to switch to speakerphone mode.
n
Press the key shown.
]
Replace the handset. Proceed with your call.
if nec.
+
or
-
Set the call volume. Keep pressing the key until the desired volume is set.