X12 ULTRA
OCTOMINER™
System Quick Start Guide
Welcome
Thank you for purchasing the OCTOMINER™ X12 ULTRA™ mining system.
This guide will help you set up the system and troubleshoot the most common
issues you might encounter.
Initial testing and set up
The system has been pre assembled and tested to be in working condition. There are
a few simple steps to inserting your graphics cards, connecting IO and power.
1.
Open the lid by unscrewing 6 screws. 2 on the back, 2 on the front and 2 on the top of the lid.
2.
Inspect visually that there are no obstructions in the front panel fans, e.g. cables.
3.
Connect the rear panel VGA to a monitor, a LAN cable to the ethernet port and
optionally a usb device like a keyboard to the rear or front panel USB port. Lastly connect the
provided power cable to the C14 port of the power supply to boot the system.
Turn on the power
from the PDU (Power Delivery Unit in order to make sure that the power supplies power up at the
same time.
4.
Wait for the system to initialize, until you see the OCTOMINER™ boot logo.
Make sure the OLED display works, test the usb port by typing on the keyboard
(for example hit DEL key to enter the system BIOS), see that the wired ethernet lights turn
on and there is video out on your monitor. Try resetting the system from the middle button,
then try rebooting the system from the top button and the bottom button to CLEAR CMOS.
