Octave v70se, Руководство пользователя

Страница: 5 / 33

8
2. SAFETY INSTRUCTIONS
2.1. Before you begin
Before using the V 70 SE for the first time, remove the grille and install the power tubes! (See
Section 3.2 "Removing the grille"). Replace the grille before switching the V 70 SE on.
Operating the amplifier without its protective grille is dangerous and not recommended.
In case of emergency: unplug the unit from the wall outlet
Never use an amplifier that is damaged or faulty. Make sure that no one can use it until it has been
repaired by a qualified service technician. Ensure that there is easy access to the IEC socket and
power cord.
Do not open the case
There are dangerously high voltages and hot tubes inside this equipment. To avoid a burn or the
risk of electric shock, never allow anyone except qualified personnel to open the case.
Servicing and maintenance
For reasons of safety, please ensure that any servicing, repairs or other modifications to OCTAVE
equipment are carried out only by a qualified technician. Always get an engineer to replace blown
fuses with ones of the same type and rating. If your amplifier requires servicing, please ship or take
your equipment directly to OCTAVE or to one of our authorized service centers.
Modifications to OCTAVE equipment
Use "audio grade" fuses and other power cables at your own risk. The use of such devices will void
the warranty. This also applies to the use contact fluids on the tube sockets.
Explanation of the warning symbols:
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-insulated, 'dangerous
voltages' within the product's enclosure that may be sufficient to constitute
a risk of electric shock to persons
The exclamation point within an equilateral triangle is intended to alert the
user to important operating and maintenance instructions
Before connecting up
Make sure that the voltage of your amplifier matches your electricity supply voltage.
Grounding
This amplifier is a protection class I device (with an earth conductor). To avoid the risk of electric
shock in the event of a fault, the unit must be grounded. To do this, use the power cable supplied
with the amplifier.