Blue power LED
The blue "power" LED illuminates when the power amplifier (or
integrated amplifier) is switched on via the amplifier's power
on/off switch.
Yellow
unload
LED
The yellow "unload" LED (discharge control circuit) illuminates
for approximately two seconds after switch-off, and also when
the electronic protection is activated and when the V 40 SE is
powered down with Ecomode on. The Super Black Box is
equipped with a rapid discharge circuit, which discharges the
unit's electrolytics. The yellow LED indicates that that this
procedure is taking place. The discharge circuit also activates
if the SBB connecting cable is accidentally removed. This is to
prevent the SBB maintaining its charge when it has not been
properly disconnected.
Connecting to the amplifier
Warning! Before connecting the Super Black Box, make sure
that the power amplifier is switched off via its on/off switch or
disconnect the plug from the wall outlet.
When inserting the connector, guide the anti-rotation lug
carefully into the mating recess in the socket.
N.B. The LED on the Super Black Box extinguishes when the
amplifier's electronic protection circuitry is activated, as the
protection circuitry shuts off the power to the amplifier.
Safety instructions and partnering amplifiers
Do not open the case
Because of the dangerously high voltages inside this unit, only
qualified personnel should open the case.
Location
OCTAVE equipment is designed strictly for use in a dry
domestic environment. Do not use it in the open air or in damp
environments! Never place plants or liquid-filled containers on
the equipment. Care should be taken to avoid objects falling
into or liquids being spilled into the case. Should this happen,
remove the mains plug immediately and have your amplifier
checked by a qualified service technician.
Содержание Super Black Box
Страница 1: ...Super Black Box...
