Octagon SF 1028P HD - Noblence, Руководство пользователя

Страница: 42 / 84

42
2. Configuration
2.1 Recording Option
 Alarm Confirm Message : Turn
‘ON’
this Alarm message to
indicate and show the alert pop-up message when there is a
reserved recording event. The alert message will show 3
minutes before the starting time of the reserved recording
event.
 Recording Stop Message :
- Set 'On' : When you press the STOP button while recording,
then a confirmation window is displayed.
- Set 'Off' : When you press the STOP button while recording,
the STB will stop the recording process immediately /
instantly without asking the additional confirmation from the user.
 Extra Recording Time Before(Start) & After(Finish) :
- You can add an extra recording time before start / after finish
(1min /2min /3min /4min /5min/
10min/ 15min/ off)
to scheduled recording events. If you set an extra recording time by using the
ARROW
and
OK
buttons, the scheduled recording event will have a
‘Start’ / ‘Finish’
time of
additional recording time added to the basic event. This option only works for real time events.
But, when you schedule a service recording in the Timer Settings menu, this option has no affect.
 TimeShift Start : You can choose the method of TimeShift function.
- Auto : TimeShift function is automatically activated.
- Off : TimeShift function will be disabled.
- Manual : TimeShift will be activated when the Pause key is pressed.
 TimeShift Duration : You can adjust TimeShift duration in 30 minute intervals.
(Off /30min /60min
/90min /120min).
This duration defines the maximum time length of the TimeShift as long as the
storage device has enough memory space left.
 Playback Position Jump : When you use LEFT/RIGHT ARROW button to move back/forward through
the recorded time bar, You can select the time intervals.
(10 Sec / 30 Sec / 1Min / 2 Min / 4 Min / 10
Min / Auto).
 Playback Numeric Function : This selection of function defines the operation type of the NUMERIC
buttons of your remote control unit (RCU) while the
‘Playbar’
is displayed on the screen.
-
Commercial Skip :
When the
NUMERIC
buttons (1 to 9) are pressed the video will move forward
according to the
NUMERIC
buttons pressed. For example ; when
‘1’
is pressed, 1min move forward,
‘5’
is pressed, 5min move forward from current position. When
‘0’
is pressed, it will move back for
1minute.
-
Percentage Move :
When the
NUMERIC
buttons are pressed, the video will move to the location of
that % percentage of numbers pressed. For example ; if you press
‘10’
, you will move to the 10%
location of the total video length. If you press
‘99’
, you will move to the end of the video clip
recorded.
 TimeShift Device : You can select the TimeShift Device you wish to use.
- Hard Disk, USB1(Front), USB2(Rear Top), USB3(Rear Bottom), Network Drive.
 Record Device : You can select the Recording device you wish to use.
- Hard Disk, USB1(Front), USB2(Rear Top), USB3(Rear Bottom), Network Drive.
 SATA Disk Select : You can choose between Internal, or External SATA disk connected.