Ochsner AIR FALCON 212, Руководство по эксплуатации

Страница: 59 / 88

OTS_EN | www.ochsner.com 59
Expert mode
Minimum buffer tank temperature
Parameters Description Unit
Operating
program: min-
imum buffer
tank temper-
ature
Here, you can specify whether and how
the minimum target values of the individ-
ual heating circuits should influence the
minimum buffer tank temperature limit.
The temperature specified via this setting
cannot be undershot by the buffer tank
controller.
-
Setting Description
Temperature
setting
The minimum buffer
tank temperature is lim-
ited by the parameter:
Minimum target buffer
tank temperature
The heating circuits
have no influence on
the minimum buffer
tank temperature limit.
Minimum flow
temperature,
heating circuit
1-X
The minimum flow
temperature from the
selected heating circuit
is used as the minimum
buffer tank temperature
limit.
Minimum flow
temperature
of all heating
circuits
In this mode, the lowest
“Minimum flow tem-
perature” of all heating
circuits installed is used
as the minimum buffer
tank temperature limit.
Minimum buff-
er tank target
temperature
The minimum buffer tank temperature is
limited via the value specified here if the
following is selected for operating pro-
gram “Minimum buffer tank temperature”:
°C
Temperature setting
1 Minimum buffer tank temperature
2 Set „Target buffer tank temperature“
3 Actual buffer tank temperature
Setting target values
»
Open the menu.
»
Select “Heat manager”.
»
Select “Settings”.
The parameters can be found under the following menu
item: “Buffer tank temperature limit”
»
Make the required settings.
»
Return to the main screen.
Setting the operating program
»
Open the menu.
»
Select “Heat manager”.
»
Select “Operating program”.
»
Make the required settings.
»
Return to the main screen.
27.4.4 Statistics
In addition to the standard information, further information
can be viewed in expert mode.
Heating overview
This menu displays the annual values for thermal ener-
gy generated and electrical energy consumed in heating
mode. The seasonal performance factor in heating mode
for each year is also displayed.
Parameters Description Unit Ab-
brevi-
ations
Heating energy,
heat pump
This indicates the thermal en-
ergy generated in the defined
period by the heat pump for
heating.
kWh HWP
Auxiliary heater
heating energy
This indicates the thermal en-
ergy generated in the defined
period by the electric auxiliary
heater for heating.
kWh HZH
100% efficiency is assumed
for the electric auxiliary
heater. The electrical energy
consumption therefore cor-
responds 1:1 to the heating
energy generated.
Defrosting energy,
heat pump
This indicates the thermal en-
ergy generated in the defined
period by the heat pump for
defrosting.
kWh AWP
Auxiliary heater
defrosting energy
This indicates the thermal en-
ergy generated in the defined
period by the electric auxiliary
heater for defrosting.
kWh AZH
100% efficiency is assumed
for the electric auxiliary
heater. The electrical energy
consumption therefore cor-
responds 1:1 to the heating
energy generated.
Electrical energy
consumption, heat
pump, heating
This indicates the electrical
energy consumed in the de-
fined period by the heat pump
for heating.
kWh EHWP