Ochsner AIR FALCON 212, Руководство по эксплуатации

Страница: 23 / 88

OTS_EN | www.ochsner.com 23
Heating circuit
11.5 Weather-compensated controller
Weather-compensated heating controllers use the aver-
age outdoor temperature for the heating and cooling limits.
It depends entirely on the set heating and cooling curve
whether a target value is generated from the current out-
door temperature.
11.5.1 Heating curve
The heating curve has the specific function of ensuring that
the heating circuit is heated correctly relative to the target
room temperature and the outdoor temperature.
X Average outdoor temperature
Y Flow temperature
1 Heating curve set via the parameters (applicable
when target room temperature = heating curve refer-
ence room temperature)
2 Parameter: Heating limit
3 Parameter: Outdoor temperature base point
4 Parameter: Flow temperature at base point
5 Parameter: Standard outdoor temperature
6 Parameter: Flow temperature at standard outdoor
temperature
7 Heating curve calculated by controller (applicable
when target room temperature is greater than heating
curve reference room temperature)
8 Heating curve calculated by controller (applicable
when target room temperature is less than heating
curve reference room temperature)
9 Heating function active
10 Heating function not active