Ochsner AIR FALCON 212, Руководство по эксплуатации

Страница: 16 / 88

16 www.ochsner.com | OTS_EN
Controller description
OPERATION
9. Controller description
The OTS heat pump controller includes software capable
of automatically controlling heat pump heating systems
with a cooling function as well as DHW heating.
All the settings required in the system can be made using
the user interface on the heat pump or via the app.
9.1 System components
The standard system always consists of the following com-
ponents:
► OTS controller
► User interface
9.2 LED display on user interface
LED Designa-
tion
Col-
our
Mode Description
Energy
supply
Green On Switched on
from Switched off
Operation Yellow On Switched on
from Switched off
Communi-
cation
Yellow Flashes at
consistent
intervals
Communication be-
tween controller and
user interface is in
progress
Off / flashes
6 times and
then pauses
Communication
between controller
and user interface is
impaired
9.3 Main screen
The main screen shows current temperatures and the sta-
tus of the heat pump. There is a separate main screen for
each heating circuit and each DHW circuit. Swipe side-
ways on the touchscreen to switch between the individual
circuits.
9.3.1 Main screen for heating circuits
1 Name Heating circuit 1
2 Current temperature of heating circuit
3 Status of heat pump
4 Operating program
5 Menu
6 Time program
7 Weather forecast/location
8 Current outdoor temperature (value measured by
controller)
9 Current DHW temperature
10 Seasonal operation
11 Current relative humidity (value measured by room
temperature and humidity sensor)