OCEM PAPI, Руководство по эксплуатации и обслуживанию

Страница: 20 / 40

INST
ALLA
TION
UT-MT-0970_1.0_02-08-2022 (EN)
Use and Maintenance Manual
PAPI
20
3.2 Foot assembly
Store all the components in the original packaging until the time of installation.
Screw the ring nut to the frangible coupling for about 2 thread turns. Screw the coupling on the plate until tightening.
Insert the ring inside the seat and screw the nut on the frangible coupling without tightening (make maximum 3 turns).
Insert the ring inside the seat and screw the nut on the threaded pin without tightening (make maximum 3 turns).
Cut the EMT 2” pipe to the length envisaged in the project. Insert the tube in the joint and tighten the nut.
Position the threaded pin and tighten the nut.