OCEM DIAM3200 IGBT, Руководство по эксплуатации и обслуживанию

Страница: 11 / 58

DESCRIPTION
UT-MT-0938_1.0_30-03-2023 (EN)
Use and Maintenance Manual
DIAM3200
11
2 FIXTURE DESCRIPTION
2.1 General characteristics
The DIAM3200 constant current regulators are designed for the purpose of powering series circuits for luminous
fixtures of airport areas: runways, taxiways and aircraft aprons.
The DIAM3200 constant current regulators (URCC) are optimized static power supplies, whose control is ensured
by insulated gate bipolar transistors (IGBT), capable of maintaining constant the output steps independently from
the load fluctuations and the supply voltage.
The DIAM3200 constant current regulators are stackable (max. 3 units) to optimize the space they occupy on the
ground.
The DIAM3200 constant current regulators are compliant with the rules:
IEC 61822, Edition 2.0
AENA DIN/DNYM/PPT/002-05/13
The DIAM3200 constant current regulators described in this manual have been designed to
be installed on the levelled floor with adequate flatness and strength characteristics.
The normal installation condition is a fixed, stable and non-slip floor, free of protuberances,
hollows or inclined planes, designed and constructed with characteristics suitable to the
actual operating conditions.
The positioning of the unit must guarantee easy access to complete use and maintenance
operations.
The supply circuits, of suitable technical specifications, can be positioned within pipes, ducts
or cable trays that comply with the applicable regulations in force.
In the same conduit, without separations, no conductors referring to different services must
be laid (this prohibition is extended to all connecting lines, even if the conductors operate
at the same operating voltage).