OceanDMX RC
.
2021 INSTALL & OPERATION MANUAL
21
3.6 RECALL THE SAVED COLOURS / SCENES
3.7 BUILT IN CYCLE MODES (COLOURS ONLY)
Activate the remote with ON/OFF button; Click the play button on the remote to play the 10 built-in effects; Press and
hold down to speed up/down the running effect, click play/ pause to cycle trough the modes.
BUILT-IN 10 COLOUR CHANGING MODES
Mode 1:
Any two colours of RGB mix fade-in & fade-out
Mode 2:
RGB three colours mix fade-in & fade-out
Mode 3:
RGB three colours mix fade-out & fade-in
Mode 4:
RGB flash
Mode 5:
RGB three colours fade-in & fade-out successively
Mode 6:
RGB three colours fade-in successively
Mode 7:
RGB three colours fade-out successively
Mode 8:
RGB three colours jump changing successively
Mode 9:
R&B two colours mix fade (R in B out), then G fade-
in, then R&B mix fade (R out B in), then G fade-out
Mode 10:
B fade-out, then G&B mix fade (G out B in), then
R&G mix fade (R out G in), then R fade-in
Table 3: Built-in 10 colour changing modes
STEP 1:
Click
ON/OFF
button to activate the
remote.
STEP 2:
(Optional)
Choose and click one or
multiple paired zone numbers (Lights as
default will always be on zone 1).
STEP 3:
Click any scene buttons of
S1-S3
(e.g.
S3
) to recall the saved scene.
STEP 1
STEP 2
STEP 3
ON/OFF
PLAY/PAUSE
